USED Gibson USA Gibson / 60s Hummingbird Cherry Sunburst [20]

With its distinctive appearance and name, the Hummingbird has gained popularity as a classic Gibson square-shoulder body model.
The Hummingbird is an acoustic guitar that looks great in Cherry Sunburst, and is loved by many artists along with the Gibson J-45.
The spruce top and mahogany sides and back give it a warm Gibson-like sound, while the square shoulder gives it a slightly hard sound.
This instrument is in relatively used condition, and there are some paint peels near the soundhole due to picking.

There is also a large crack in the paint on the upper front right side, and a strap pin has been added to the heel of the neck.
The hardness of the Hummingbird has been well adjusted to the sound of the instrument, and it has a good resonance.
The fretboard has been adjusted after our arrival, including fret rubbing, so it is in good playing condition.
There are scratches due to use, and the paint is peeling on the sound hole and the side of the body.

Item rank: B (average)

Year of manufacture: 2003
Truss rod : There is enough room.
Fretboard: 60-70%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 2.15kg
Serial ： 02773020

Truss Rod: No problem (slight waviness)
Fret remainder: Still can withstand cutting, but the frets are low.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|44.2mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness(near 12th fret)|-
Scale|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|Galli Strings / .012-.054 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, bracing gluing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem (slight waviness).

Fret Remaining
There is a note that the frets are low, but can still withstand cutting.

String height (bass string side)
2.5mm above the 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut width
44.2mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for Setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, bracing gluing